ADME 2.4 SURFACE MOVEMENT GUIDANCE & CONTROL SYSTEMS

  • Home ADME ADME 2.4 SURFACE MOVEMENT GUID....

ADME 2.4 SURFACE MOVEMENT GUIDANCE & CONTROL SYSTEMS

At their simplest these may consist of ground markings and stop & go lights. More sophisticated systems will incorporate taxiway centre line lighting and stopbars which can delineate the cleared route of aircraft. Where a need exists, surface movement radar or some other form of aircraft position sensing may be installed. Whatever the sophistication of the system, the essential requirement is that some means exist of ensuring the safety of aircraft while moving on the manoeuvring area.


IFATCA Policy is:

The appropriate ATC authority should institute an SMGCS which includes procedures for avoidance of collision between aircraft, and between aircraft and vehicles on the ground.

Surface movement radar should be used as a monitoring device and should not be used for the provision of a control service unless procedures are available.

The boundary between apron and manoeuvring area should be clearly defined. Longitudinal separation standards to achieve the objectives of preventing collisions between aircraft and aircraft and vehicles on the ground, during push back and taxi, must not be specified.


See: WP 59 – Nairobi 1987 and WP 93 – Hong Kong 2004

 

Last Update: July 17, 2020  

November 3, 2019   62   Jean-Francois Lepage    ADME    

Comments are closed.


  • Search Knowledgebase